 |
This is a well made and sturdy product and once put together is very easy to use with the TV of your choice. It has a large selection of standard VESA spaced holes on the TV mounting arms, so you are able to set the TV at the appropriate height wherever the VESA holes are located on the back of your TV. These arms then easily hook onto the part of the bracket mounted on the wall and can be tilted to suit the viewing angle required. The arms are simply secured with screws locking them in place. There is adequate space the mount the bracket over a power/aerial socket, however check that the socket is mounted flush in the wall and that it won't get in the way of the mounting arms on the rear of the TV, this will depend on the VESA spacing of you TV. I would have given the bracket 5 stars except for a few of issues:- the instructions are not very clear and anyone who has not set up a bracket like this would struggle to put it together in my opinion. Also there were insufficient washers supplied to fit them where the instructions direct, though this isn't really a problem as they aren't really necessary from an engineering viewpoint. Also the wall mounting holes in the bracket aren't big enough to allow some minor adjustment to get the bracket dead level, so be careful to drill the holes in your wall accurately.Read full review
Verified purchase: Yes | Condition: New
Overall I think this product is really good value wall mount. It’s slim design means the tv sits nice a close to the wall, looks good. The issue I have is it doesn’t fit a 32inch tv.... well it will but it will stick out at the sides, I solved this by just using half the bracket supplied.... and threw the other half in the bin. Also I have a samsung tv and I could only find bolts to fit the lower fixing, without using the spacers which should be fitted, the top bolts were to long, so I had to source my own and once again bin all the fixings that came in the box.... all in all I probably used half what I paid for and hence 2 stars.... not terribly environmentally friendly to produce all that to have someone throw away a big chunk of what was packaged.
Verified purchase: Yes | Condition: New
It comes in kit form and is easy to assemble, spacers and screws all you need to attach the bracket to TV and bracket on the wall. My Tv was a 32 " so I only used half of the wall kit bracket as it's quite long if you assemble to full length. No problems a good value bracket that tilts downwards..
Verified purchase: Yes | Condition: New
Used a number now for friends and family I changed fixings to rawlbolt type as didn’t want to take any chances plugs and fixings seem short to me but other than that All was good Oh the other thing is the locking screws are hard to get to once you hang the tv up on the wall
Verified purchase: Yes | Condition: New
Overall the build of this bracket is fair. A thin steel but clever use of extrusion to generate strength. Disappointingly had to assemble two halves of the bracket to make up its length, I would've preferred if this was a single piece design. The screws supplied for mounting the tv were varied which I imagine covers most TVs. Unfortunately the screws that fitted my tv were far too long. Although spacers are included I wanted the TV to be as flush as possible. After sourcing shorter screws and mounting the TV onto plasterboard it looks fantastic. Probably as slim as physically possible for my TV. Overall a great product at this price point, if not quite 100% perfectly thought out.
Verified purchase: Yes | Condition: New
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best-selling in TV Stands & Mounts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on TV Stands & Mounts
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- You may also like
